Categories

Contact Us

Nanjing Kingmore Logistics Equipment Manufacturing Co.,Ltd
Head office: RM. 1204, BLDG.-2, NEW SPACE DEVELOPMENT CENTER, NO.126 TIANYUAN RD., JIANGNING, NANJING, CHINA.
Factor 1: No.8 Xingfu Ave. Hengxi St., Jiangning, Nanjing, China
Factor 2: No.896 Jianshe Road West, Economic Development Zone, Jinhu County, China
Tel: +86-25-86154259
Fax: +86-25-86154259
Mob: +8613512517514
E-mail: sales@kingmoreracking.com

Drive In Racking System With Powder Coated For Warehouse Storage

1.Introduction: Drive-In rack, being one of the most dense racking options available , gives you maximum use of available space. Drive-In is a high density, LIFO (last pallet in, first pallet out) racking system that has much fewer aisles, which allows for better cube utilization. You can store...

Send Inquiry

Product Details

1.Introduction:

Drive-In rack, being one of the most dense racking options available, gives you maximum use of available space. Drive-In is a high density, LIFO (last pallet in, first pallet out) racking system that has much fewer aisles, which allows for better cube utilization. You can store up to 75% more pallets than a selective system.


4d924409c1c74aea3137ecda46a5b6f3_副本.jpg


Drive-In Rack and Drive-Thru racking are terms that are often used interchangeably.  In some environments, it can be difficult to differentiate between the two.  Typically, Drive-In racking requires operators to drive into the racking system from one side and remove pallets from the same entry point. Some Drive-In rack systems have a wall or are otherwise closed at the opposite end.

 

2_副本.jpg

 

2.Components of drive-in rack:

1).Frame

2).Pallet rail

3).Double side arm

4).Single side arm

5).Top beam

6).Back beam

7).Double side row spacer

8).Single side row spacer

9).U shaped upright protector

10).Top bracing

11).Back bracing

12).Ground rail


1351072777_副本.jpg


3.How does drive-in rack work?

 

Forklifts load and unload pallets by entering the rack structure through the front of the bay, which is made possible by the lack of traditional pallet racking beams. Instead, drive-in rack uses rails that run along the inside of the bays (from front to back), in which the pallets rest on. Being that this system is LIFO, the last pallet loaded will be the first unloaded. Floor mounted guide rail is a recommended option for drive-in rack systems to reduce frame damage from forklifts.

Drive-In rack operators must be very careful not to damage the pallet racking. Because pallets are stored so densely and a driver must enter the pallet racking system with only a small clearance on either side, a Drive-In rack system must be checked for damage frequently. As soon as pallet rack damage is noticed it must be reported and properly repaired or replaced. A strict safety doctrine must be adhered to with a Drive-In rack system.


201301291359442035050_副本.jpg 

 

4.Advantages of Drive In Racks

Maximize utilization of square footage in your facility

Limited aisles for more efficient use of space

Unlimited depth of storage

Utilizes density over selectivity

Cost-effective.


picture of drive in rack project (3)_副本.jpg


5.Application:

We are the most professional racking manufacturer in China. We have done many drive in racking projects. These are some pictures of some projects about drive in rack.

 

 03_副本.jpg


6.Packing and shipping:

1).Packaging details: Standard export package. All parts packed by steel belt and covered by plastic film. 

2).shipping time: 3 weeks after receipt of the 30% deposit.


打包_副本.jpg

 

7.Company information:

Now we have two factories in NanJing and Jinhu separately. The total production area is 80000 square meters, with a yearly production capacity of 200000 tons. We have more than 30 sets of rolling production lines, many sets of welding robots and 4 sets of full-automatic powder coating lines. We have been concentrating on racking products for more than 10 years. Our products are widely used in many industries, such as machinery, electronics, automobile, pharmacy, electricity, garment and so on.


front_副本.jpg


If you're interested in our drive in racking system with powder coated for warehouse storage, welcome to place orders with our factory. As one of the leading Drive in Rack manufacturers in China, we can assure you that our products are in line with the highest quality standard of RMI, AS4084, FEM, CE, etc. And the customized orders are also welcome.

Inquiry