Categories

Contact Us

Nanjing Kingmore Logistics Equipment Manufacturing Co.,Ltd
Head office: RM. 1204, BLDG.-2, NEW SPACE DEVELOPMENT CENTER, NO.126 TIANYUAN RD., JIANGNING, NANJING, CHINA.
Factor 1: No.8 Xingfu Ave. Hengxi St., Jiangning, Nanjing, China
Factor 2: No.896 Jianshe Road West, Economic Development Zone, Jinhu County, China
Tel: +86-25-86154259
Fax: +86-25-86154259
Mob: +8613512517514
E-mail: sales@kingmoreracking.com

Comparison of Drive in rack and Drive throu rack from Kingmore racking

- Apr 27, 2018 -

The Drive-In Rack and Drive-Thru Rack systems are cost-effective solutions for high-density storage. The static system has a track for running rack depth when the pallet is placed. The only limitation of the pallet storage depth is the ability to drive deep within the system. Drive-in rack depth reduces the need for channels and greatly increases cube space utilization.

 

4d924409c1c74aea3137ecda46a5b6f3_副本.jpg


The drive in racking system is loaded and retrieved from the same side to create a LIFO(First-In-Last-Out) inventory retrieval organization.

 

drive in rack_副本.jpg


The Drive-Thru tray shelving system is loaded from one side and unloaded from the other side to create a first in, first out inventory retrieval (FIFO); the forklift can be accessed from any channel.


drive throu_副本.jpg


The stiffness of the two pallet racking systems is either supported overhead or connected with the top structure. The drive in rack system provides low-cost bulk storage and guaranteed inventory rotation. The Drive-In Rack System is a very good choice for freezers.

 

7-140GQ40333506_副本.jpg


Drive-In Rack and Drive-Thru Rack Systems are easy to install, use simple support arms to hold the rails, and can be attached to standard pallet racks or special structural designs.

 

drive-in project_副本.jpg



The Kingmore Shelf Engineer has specifically designed a diagonal leg frame to increase the extra space and safety of the forklift movement in the tunnel. This greatly reduces the risk of impact damage to the front column and allows the driver to swing the cargo when leaving the shelf.

 

Drive-type racks and pass-through racks should be used for a large number of similar products. Due to the high storage density, the product is not easily accessible because the pallets are stored from floor to ceiling. However, dense storage space can create seven times more product or three times more space than a pallet rack because the pallets are stored back-to-back, from floor to ceiling.


picture of drive in rack project (3)_副本.jpg

 

The drive in rack system needs to pay close attention to the safety rules of the pallet rack and the forklift driver actively reports the damage of the pallet rack to the rack system. As the driver must enter the rack system, the possibility of damage to the rack will be increased.

 

Our products includes: Pallet rack (beam rack), Drive-in rack, Radio shuttle rack, Push back rack, Cantilever rack, Mezzanine, Steel platform, Live rack, Carton flow rack, Medium duty shelving, Light duty shelving, Drawer rack, Movable archive shelving, Work apparatus etc.

 

We have passed ISO9001:2008 certificated in 2012, CE certificated in 2014, and all of our products comply with AS4084-2012 standard, American RMI standard and FEM standard. 

www.kingmoreracking.com.


Related Products