Mold shelf, also known as the mold rack or drawer shelves, mainly storage a variety of mold items, according to
the requirements of the layer load capacity, it can be divided into light-duty molds and heavy-duty molds shelves.
The top of the shelf can be configured mobile hoist, in order to facilitate the lifting of the mold.
Light-duty mold racks use 100 # channel as a dedicated column, the column rolled by the quality of Q235 strip
from a one-time. Drawer tray frame generally use tube and 4.0 bending pieces welded steel shop. Guide slot with
4.0 steel plate bending. Top, bottom has beam connection, roof can store items. Heavy duty mold racks adopt heavy Duty
Racks as a whole frame, and guide rails and drawer trays are installed on the shelf frames. General column
specification is not less than 90 × 70mm.
The mold shelf is composed of columns and column rods. The guide grooves are installed on the column pieces,
and the upper and lower beams are connected and fixed. Then, the drawer tray is installed in the guide groove,
the upper limit pin and the guide rail are finally installed, and the roof is laid finally. If there is no hanging in the
workshop, you can also set up crane on the overhead pillars, and install manual or electric hoist. The rails should
adopt the beam of not less than 100 × 50. If you have some needs or interests in our mold racks, please feel free
to contact us. We are very willing to design the drawing and offer the best service, the best price and the best
quality to you asap. Thanks. Looking forward to your good news.