The following four issues should be noted when using shelves and forklifts:
1, forklift tonnage configuration. Mainly: 1.5T, 1.8T, 2T, 2.5T, 3T; choose which kind of procurement configuration needs to see the weight of the goods, and the highest fork height. Because with the height increase, the maximum weight of the forklift safety gradually decreased.
2, forklift drive. There are mainly battery forklifts and diesel forklifts; due to indoor and outdoor operations, the two configurations are considered. Relatively speaking, battery forklifts are much less powerful than diesel forklifts.
3, forklift lifting height. Taking into account the overhead operation requirements of the warehouse, combined with the height of the warehouse,the lifting height of the forklift should be properly considered from the standard configuration of 3.5 meters, 4.5 meters, 5.5 meters, and 6 meters; it is usually separated according to the low level operation and the high level operation. Consider several combinations to reduce total purchase costs.
4, the height of the forklift. Considering that the forklift has to enter the interior of the container, the height of the forklift mast is also taken into consideration. It requires a net height of 2.3 meters or less in the container and requires at least two masts; however, the lifting height of the forklift and the height of the mast will conflict. If the height is too high, whether it is a three-section gantry or a two-section gantry, the gantry height is 2.4 meters, so the two are not available.