The installation quality of the shelf directly affects the normal operation of the stacking equipment and the use effect of the shelf, and is more important for an automated three-dimensional warehouse. The installation of racks shall be horizontal and vertical, and the maximum vertical deviation of the columns shall be the percentage of full height, and shall be strictly stipulated in the installation specifications of shelves. Most of the ground is uneven and requires special adjustment techniques. The safety of the entire racking system depends on the correct fastening of the nut-screw. The installation conditions and the size of the connection torque require special data and installation techniques to ensure that the shelves are securely fastened. Improper assembly may result in improper internal stress of the components and cause damage to the shelves. Only trained professional installation teams with sufficient experience and qualifications can meet these requirements.
Prior to installation, a detailed installation plan should be submitted based on manufacturing conditions and site conditions. The installer should comply with the user's rules and regulations and safety regulations. In addition, the clothes of the installer should be uniform, the safety facilities should be complete, the tools should be placed neatly, and the site should be cleaned and cleaned every day after work to ensure that the site is clean and tidy.
This the pallet rack installation guide example for your reference. Note: Assemble the unit on a sturdy and level surface. Avoid assembly on carpet. To facilitate assembly we recommend having two persons assemble the unit. If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Kingmore Racking at 0086-25-8615 4260. We can assist you or give you directions.
Make sure all the components in place before using the unit, if you have any defective parts please do not use, improper installation may result in damages or injuries.
1, Unpack the unit and confirm that you have all the hardware and required parts.
2, Connect the footplate onto the upright.
3, Install two M10x25 bolts.
4, Put two uprights on ground
5, Brace installed from third hole, must note brace block
6, Space between brace is 600mm.
7, Space between brace is 600mm.
8, put beam onto upright.
9, Insert safety pin to the hole on beam connector.
Kingmore Racking is a modern enterprise which incorporates product development, design, production, sales and service. We continue to introduce advanced foreign technology and design concept, and constantly improve all-round integrated services capabilities, such as overall planning of storage system, design of experiments, profiles rolling, sectional material rolling, surface spraying, installation and debugging.
Our products includes: Pallet rack (beam rack), Drive-in rack, Radio shuttle rack, Push back rack, Cantilever rack, Mezzanine, Steel platform, Live rack, Carton flow rack, Medium duty shelving, Light duty shelving, Drawer rack, Movable archive shelving, Work apparatus etc.
We have passed ISO9001:2008 certificated in 2012, CE certificated in 2014, and all of our products comply with AS4084-2012 standard, American RMI standard and FEM standard.